Long-run type to facilitate longer runs without experiencing voltage drop. 33ft per reel. 3W/ft power.
Cyron RGBW lights are made with quad LED chips that have red, blue, green and 2700K white combined into one body. For applications where having 2700K warm white light is important. Provided with connectors on both ends of the reel and mated plugs. It can be cut in the middle to provide 2 sections of light. Light can be cut at ~4 inch cut-marks.
If you need more than 2 sections you can contact Cyron and inquire about custom cut sizes that already have your desired wire length attached to the light. This will make the installation far easier than trying to make connections during installation.
Cyron ribbon lights install reliably by using the genuine 3M two-side tape on the back of the lights. Most companies skimp on this important factor. Even though they may be marked with 3M logo, they simply are not, and lights will peel off in a short time.
- True-color RGB + Warm white 2700K
- Hi Lumen LED chips
- Superior color consistency
- Trusted and reliable cUR UL listed products
- 2 years warranty
- Multicolor RGB+W 2700K
- IP22 ingress rating ribbon lights
- Controller IP22 indoor, Power supply IP65 indoor/outdoor
- 3W/ft Max
- 100W, 24VDC LED operating voltage
- Common anode
- 16.4ft (5 meter)
- Cut point 3-7/8"
- 11/16" OC LED spacing
- cURus rated LED lights
- Working temp -10C to 55C
Color | Multicolor RGBW |
---|---|
Manufacturer | Cyron |
width | 12 |
length | 12 |
height | 4 |